unit record and console tables. It must appear as the last macro
instruction before the END statement in the
The name field must not be specified for the
format of the
r----------------------------------------------------------------------------
t Name
[
is a hexadecimal device address that
(in printer-keyboard mode with the 3213
or a
with a 3286 printer required, or in display mode).
[ ,
is the address or a list of addresses of alternate consoles. These
addresses are hexadecimal device addresses that were previously
specified in an
number of alternate consoles that may be specified. These devices,
which should be physically located as close as possible to the
primary system console, may be any device supported as a
console is not operational at
first alternate console is not operational, an attempt will be made
to start the next alternate console. If an operational console is
found, the console will be used as the
console. If no operational alternate console is found (or if no
alternate console was specified),
with a wait state code of
register (IAR).
telecommunications line on a real
Controller unless the
operating system with a
3767 communication Terminal (operating as a 2141), it must use the
EBCDIC transmission code. If the alternate console is a local
3277, it must be a Model 2.
156 IBM