userid PRIORITY = nn
nn is the the assigned priority of the specified user. The lower the
value, the higher the priority. SISSIST 01 or OPP indicates that the virtual machine assist (and the
interval tiaer assist portion of V!/370 ECPS processor is so equipped) is active or inactive
available on the systea). (attached processor applications) SISSIST {OB } PROC nn, {OB } PROC nn OPF OPP virtual
if the
(or not OB or OFF indicates that virtual aachine assist (and the virtual
interval tiaer assist portion of V8/370 ECPS - if the main processor or the attached processor is so equipped) is active
or inactive for the designated processor, PROC nne
nn can be any hexadeciaal value from 00 to 3F. The response is
indicated in hexadeciaal values. The values assigned to the main processor and the attached processor are assigned by the
installation when the system hardware is installed. !ote: To deteraine if the expanded virtual machine assist portion of the V8/370 Extended Control-Prograa Support is active requires a positive
response to both QUERY CPASSIST and QUERY SASSIST com.ands. USER userid
!here: PROCESSOR AFPINITY affinity
userid is the user identification of the virtual aachine.
affinity is the address of the processor (aain or attached) that will execute the virtuai machine instructions. Affinity can be any hexadecisal value fro. 0 to 3P. Ths processor address is set
when the Systea/370 processors are installed. In attached
processor systeas, the processor addresses are unique. If BOBE is indicated in the response, no affinity is set and the
virtual aachine is dispatched for execution on the first
available processor. In System/370 80del attached processor and main
console switch setting.
122 V8/370 Operator's Guide
168 installations, the role of
processor can be reversed by a
The format of the Class a QUERY command is:
Query DAsd
TApes LINESl UR GRaf
ALL
DAsd volid
TDsk STORage raddr
r , ISysvirtl IVirtuall 1- SYStea raddr DUMP r , IACTive I I OFFline I IFREe I 'ATTach I IALL I L IQuery LINES is not effective for 3704/3705 resources unless the 3704/3705 is operating in 270x Emulation Program (EP) mode. For 3704/3705 Communications controllers operating in Retwork Control Program (RCP) or Partitioned Emulator program (PEP) mode, use the NETWORK QUERY command. DASD displays the real addresses of disk or drum devices. SYSVIRT VIRTUAL TAPES LIlES UR displays the addresses and specified status of 3330V devices
that have the SYSVIRT feature.
displays the addresses and specified status of 3330V devices
that have the VIRTUAL feature.
displays the real addresses of magnetic tape units.
displays the real addresses of communication lines.
displays the real addresses of unit record devices (card
reader, card punches, printe'rs).
GRAF displays the locally attached display devices.
ALL (used as a first operand) displays all devices and the size of DASD volid TDSK STORAGE raddr 1 storage.
displays the active or free status of the D1SD volu.e.
displays all the currently allocated (TDSK) fro. all available syste.-ovned virtual machine users.
displays the size of real storage. temporary disk space volumes assigned to
displays forms name and image library name. Section 3. CP Commands 123
Previous Page Next Page