This file aust have a filetype of ZAP
w and must be a fixed BO-byte sequential file residing on any accessible device. If you specify PRIIT with IIPUT filename, all output produced by the ZAP service program prints on the printer. In addition,
com.ands and control records in error and errormessages display at the terminal. If you specify NOPRINT with IIPUT filename, nothing prints on the printer. All output displays
at the terminal.
Figure 12 shows the resulting output resulting fro. valid option
coabinations:OPTIONS INPUT TER! Figure 12. PRINT Commands and control records
in error and errormessages on the ter.inal. Everything
to printer.Only error messages on the
terminal. Everything on the
Printer.Valid Options and Their ZAP INPUT CONTROL RECORDS IOPRIIT Everything on the
terminal. Bothing on
the printer.
Everything except control
records on the terminal.
Bothing on the printer.
Eight types ofZAP control records exist: DU!P, IA!E, BASE, VER or VERIFY, REP, LOG, COft8EIT, and END. ZAP control records are free-form and need not start in position one
of the record but the ZAP program can accept only80 characters of data
for each control record. Separate all information by one ormore blanks. All address fields including disp (displacement) fields in VER and REP control records must contain an even number of hexadecimal digits, to a maximum of six digits (OD, 02C8, 014318). Data fields in VER and REP control records must also contain an even number of
hexadecimal digits, but are not limited to six digits.
If you wish, youexample, 83256482 or
operation.may separate
8325,6482)• the data anywhere by commas The commas have no effect on
(for
the
Theprogram sets the ROGO switch on if a control record is found to be in error. A file cannot be modified once the ROGO switch is turned
on. The next validBA!E record turns the lOGO switch off. This means
that if the control record is theIA!E record, all succeeding records
are ignored until the nextBAME, DUMP, or Elt record. For any other
error, only REP control records thatfollow are ignored.
TheDU!P control record resets the ROGO switch off. The DU!P record must not immediately precede a BASEl VER, or REP control record.
AIA!E control record must precede the BASE, VER, and REP control
records (if any) that follow aDUMP control record. Section 4. V8/370 Service Programs 201
w
com.ands and control records in error and error
at the terminal.
Figure 12 shows the resulting output resulting fro. valid option
coabinations:
in error and error
to printer.
terminal. Everything on the
Printer.
terminal. Bothing on
the printer.
Everything except control
records on the terminal.
Bothing on the printer.
Eight types of
of the record but the ZAP program can accept only
for each control record. Separate all information by one or
hexadecimal digits, but are not limited to six digits.
If you wish, you
operation.
8325,6482)
(for
the
The
on. The next valid
that if the control record is the
are ignored until the next
error, only REP control records that
The
A
records (if any) that follow a