Abendl Module Code I Nalle 001 DMSSCT 034 DMSVIP OCx DMSITP OFO DMSITS OF1 DMSITS Cause of Abend
The problem program encoun­
tered an input/output error
processing an as Either the associated DCB did not have a SYNAD rou­
tine specified or the I/O error was encountered
processing an OS CLOSE macro.
The problem program encoun-
tered an I/O error while processing a VSAM action
macro under DOS/VS for
which there is no OS equi- valent. An internal error
occurred in a DOS VSAft rou-
tine.
The specified hardware ex­
ception occurred at a spe­
cified location. "x" is
the type of exception: ! o IMPRECISE 1 OPERATION 2 PRIVILEGED OPERATION 3 EXECUTE 4 PROTECTION 5 ADDRESSING 6 SPECIFICATION 1 DECIMAL DATA
8 FIXED-POINT OVERFLOW 9 FIlED-POINT DIVIDE A DECIMAL OVERFLOW B DECIMAL DIVIDE C EXPONENT OVERFLOW T\ U E
F EXPONENT UNDERFLOW SIGNIFICANCE FLOATING-POINT DIVIDE
Insufficient free storage
is available to allocate a
save area for an svc call. An invalid halfword code is
associated with SVC 203. Figure 24. CMS Abend Codes (Part 1 of 4) Action DMSSCT120S indicates the possible
cause of the error. Examine the error
message and take the
action indicated.
Refer to the DOSLVS erder No. GC33-5319,
to determine the cause of the lSAM error.
Type DEEUG to exaaine the PSi and registers
at the time of the
exception.
If the abend was
caused by an error in
the application pro­
gram, correct it; if
not, use the CP DEFINE command to increase
the size of virtual
storage and then re­
start CMS. Inter DEBUG and type GO. Execution conti­
nues. CMS Diagnostic lids 2-243

Abendl Module Code, Name OF2 DMSITS OF3 DMSITS OF4 l)MSTTS OF6 DMSITS OF7 DMSFRE OF8 DMSFRE 101 DMSSVN 104 DMSVIB 155 DMSSLN Cause of Abend
The CMS nesting level of 20 has been exceeded. CMS SVC (202 or 203) in-
struction was executed and
provl.sl.on was made for an
error return from the rou-
tine processing the SVC. The DMSKEY key stack over-
flowed. ThA nMSKRV kAy flowed.
The DMSKEY key stack was
not empty when control re-· turned from a command or
function. Occurs when TYPCALL=SVC (the default) is specified
in the DMSFREE or DMSFRET macro. Occurs when TYfCALL=BALR is
specified in the DMSFREE or DMSFRET Macro devices.
The wait count specified in
an OS WAIT macro was larger
than the number of ECBs
specified.
The OS interface to VSAM is unable to
execution of the
program. DOS/VS continue
problem
Error during LOADMOD after
an OS LINK, LOAD, ICTL, or
ATTACH. The compiler switch
is on.
Figure 24. CMS Abend Codes (Part 2 of 4)
Action
None. abend recovery
takes place when the
next command is en­
tered. Inter DEBUG and type GO. Control returns to
the point to which a
normal return would
have been made. Inter DEBUG and type GO. Execution conti­
nues and the DftSKEY macro is ignored.
Enter DEBUG and type GO. Control returns
from the command or
function as if the key
stack had been empty. When a system abend
occurs, use DEBUG to
attempt recovery. When a system abend
occurs, use DEBUG to
attempt recovery.
Examine the program for excessive wait
count specification. See the additional er­
ror message accompany­
ing the abend message,
correct the error, and
reexecute the program. See the last LOADftOD (DMSMOD) error message
for error description.
In the case of an I/O error, recreate the
module. If the module
is missing, create it.
2-244 IBM VM/370 System Logic and Program Determination--Volume 2