8.13 ARCHMODE (Set architecture mode)

8.13.1 Function

The ARCHMODE command has been deprecated. This command was used to specify the initial archi-
tecture mode.

ARCHMODE is still accepted and is treated as an alias for the ARCHLVL console command. However in
the future the ARCHLVL command should be used instead. Please see ARCHLVL for details.

8.13.2 Syntax

See ARCHLVL console command.

8.13.3 Parameter

See ARCHLVL console command.

8.13.4 Examples

See ARCHLVL console command.

8.14 ATTACH (Configure device)

8.14.1 Function

The ATTACH command configures a new device and makes it available in the active configuration. The
effect of this command is immediately visible in the device display of the Hercules Windows GUI or the
Hercules “Peripherals” display if the GUI is not used.

8.14.2 Syntax

Descriptive

ATTACH type [argument [argument ...]]

Diagram

Êʬ¬¬ ATTACH ¬¬¬
¬¬¬ ¬¬¬§¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬§¬¬¬¬¬¬¬¬¬¬¬¬¬¬ÊÍ

argument

8.14.3 Parameter

devn

The device number of the device that is to be configured in the current configu-
ration.

type

The device type that is to be configured in the current configuration. For valid de-
vice types see chapter

argument

These are the additional arguments for the device that is to be configured in the
current configuration. The arguments are dependent on the device type. For
additional information on valid arguments see chapter

8.14.4 Examples

Example 1:

Attach a printer device to the active configuration.

HHC00013I Herc command: 'attach 000f 1403 d:/mvs/prt/prt2.txt crlf'

HHC02198I Device attached

Figure 29: ATTACH command (configure printer)