DDR
END OF VOLUME CYL xxx HD xx, MOUNT NEXT TAPE
DDR continues processing, after the mounting of the next tape reel. RESTORING volser volser is the volume serial number of the disk dumped.
The RESTORE operation has begun. COPYING volser !h§I§: volser is the volume serial number described by the input unit.
The COPY operation has begun. DUMPING volser !hgIg: volser is the volume serial number described by the input unit.
The DUMP operation has begun.
PRINTING volser !h§I§: volser is the volume serial number described by the input unit.
The PRINT operation has begun.
END OF DUMP The DUMP operation has ended.
END OF RESTORE The RESTORE operation has ended.
END OF COpy The COPY operation has ended.
END OF PRINT The PRINT operation has ended.
END OF JOB All specified operations have complete1. Section 2. eMS Commands 55

DDR
ENTER: Prompts for input from the terminal. A null line (that iS r the Enter key or equivalent) causes control to return to CMS if the virtual machine is in the CKS environment. DMKDDR725R ORIGINAL INPUT DEVICE WAS (IS) LARGER THAN OUTPUT DEVICE. DO YOU WISH TO CONTINUE? RESPONSE YES OR NJ: RESTORE function -The number of cylinders on the
input unit is compared with the number of cylinders
device.
original DASD on the output COpy function -The input device contains more cylinders than the
output device. The operator must determine if the COpy or RESTORE function is to continue. The response is either yes or no. Except as shown, there is no return code returned for the
following messages. DMKDDR700E INPUT UNIT IS NOT A CPVOL DMKDDR701E INVALID OPERAND - operand DMKDDR
7
02E CONTROL STATEMENT SEQUENCE ERROR DMKDDR703E OPERAND MISSING DMKDDR704E DEV cuu NOT OPERATIONAL DMKDDR
1 05E 10 ERROR cuu CSW csw SENSE sense INPUT bbcchh OUTPUT bbcchh
CCW ccw DMKDDR 7 07E MACHINE CHECK RUN SEFEP AND SAVE OUTPUT FaR CE DMKDDR708E INVALID INPUT OR OUTPUT DEFINITION DMKDDR 7 09E WRONG INPUT TAPE MOUNTED DMKDDR
1 10A DEV cuu INTERVENTION REQUIRED DMKDDR712E NUMBER OF EXCEEDS 20 DMKDDR713E OVERLAPPING OR INVALID EXTENTS DMKDDR714E RECORD bbcchh NOT FOUND ON TAPE DMKDDR715E LOCATION bbcchh IS A FLAGGED TRACK RC=3 DMKDDR718E OUTPUT UNIT IS FILE PROTECTED RC=1
DMKDDR719E INVALID FILENAME OR FILE NOT FOUND DMKDDR720E ERROR IN routine RC=varies
DMKDDR721E RECORD cchhr NOT FOUND DMKDDR722E OUTPUT UNIT NOT PROPEFLY FORMATTED FOR THE CP NUCLEUS DMKDDR723E NO VALID CP NUCLEUS ON THE INPUT UNIT DMKDDR724E INPUT TAPE CONTAINS A CP NUCLEUS DUMP DMKDDR756E PROGRAM CHECK PSW=psw 56 IBM VM/370 CMS Command and Macro Reference