page ot GCLU-1tlU1-1U As upaatea Apr1l 1, 1951 by TNL GN25-0537 Configurations (Terminals)
Terminals
The following system consoles are supported by VM/370 as virtual system
consoles (simulated as 3215 consoles): • IBM 2150 Console with 1052 printer-Keyboard Model 7 • IBM 3066 System Consoles Models 1 and 2 for the System/370 Models 165
II and 168 • IBM 3210 Console Printer-Keyboard Models 1 and 2 • IBM 3215 Console printer-Keyboard Model 1 • IBM System Console
printer-keyboard mode
for the System/370 Models 138 and 148
(3286 printer required) or display mode
in • IBM system Console for the System/370 Model 158 in printer-keyboard
mode (with the 3213 Printer Model 1 required,) or in display mode • IBN 7412 Console (via RPQ AA2846) with 32i5 console Model 1 • IBM 3036 Console with the 3031, 3032 or 3033 processor • IBM 3278 Model 2A Console with the 4331 or 4341 processor
Note: During system generation only, the primary system operator's
console cannot be connected to the system via a teleprocessing line.
The following terminals are supported by VM/370 as virtual system
consoles (simulated as 3215 consoles) : • IBM 2741 Communication Terminal • IBM 1050 Data Communication System • IBM 3101 Display Terminal, Models 10, 12, 13, 20,. 22,. and 23
(supported as teletype Model ASR 33/35 teletypewriter) • Terminals on switched lines compatible with the line control used by
the IBM Telegraph Control Type II Adapter (8-level ASCII code at 110 bps) such as the CPT-TWX (Model 33/35) terminals • IBM 3275 Display Station,. Model 2 with integral control unit (remote
at tachment only) • IBM 3276 Control unit Display Station Models 2, 3, and 41 with
integral control unit (supported as a 3277 attached to a 3271 for
remote attachment only) • IBM 3277 Display Station, Model 2,. via 3272 Control Unit,. Model 2
(local attachment only) • IBM 3277 Display Station, Model 2,. via 3271 Control Unit,. Model 2
(remote attachment only)
1Models 3 and 4 operate in Model 2 default mode.
112 IBM VM/370 Planning and System Generation Guide

Page of GC20-1801-10 As Updated April 1, 1981 by TNL GN25-0837
Configurations (Terminals) • IBM 3278 Display Station 2, 3, and 41 via 3274 Control unit Model 1B (supported as a 3277 attached to a 3272 for local attachment
only) • IBM 3278 Display Station 2, 3, and 41 via 3274
Model 1C (supported as a 3277 attached to a 3271
at tachment only)
Control Unit for remote Note: 3215 console simulation for graphics devices excludes processing
multiple output channel programs which contain CCW's without carriage
returns (X'01' CCW op code) on one line of the screen. These channel
programs are treated separately and VM/370 uses a new line for each
one. IModels 3 and 4 operate in Model 2 default mode. Part 1. Planning for System Generation 112.1