3704/3705 Control Program
Step 12. Applying PTFs to the 3704/3705 Load
Library
If necessary, it is possible to apply program Temporary Fixes (PTFs)
directly to the 3704/3705 load library. The CMS ZAP program applies the PTF. See the !M/37Q Guide for information on using the ZAP service program.
Testing the 3704/3705 Control Program
After you have generated a 3704/3705 control program, loaded it, and
logged on, you may want to test the 3704/3705 control program, Several CP commands are provided to control the operation, check the status, and
dump the contents of the 3704/3705. The NETWORK command loads and dumps
any- 3704/3705 control program. The existing CP commands (ENABLE,
DISABLE, QUERY, DISPLAY, VARY, and HALT) also provide support for EP 3704/3705 control programs. The NCPDUKP command formats and prints a
dump of 3704/3705 storage. Use these commands to test the 3704/3705
con trol progra m.
The NETWORK, ENABLE, DISABLE, NCPDUMP, QUERY, DISPLAY, VARY, and HALT
commands are described in the and the !M/370 fo!: General Part 4. Generating the 3704/3705 Control Program 315

316 IBM VM/370 Planning and System Generation Guide