Starter Systems The system issues the following messages:
D11
D1
D1
D1 LOADING ••••• 5749010 06pp3a 5749010 EXEC V"SERV EXEC Vf!lFPLC2 "ODULE END-OF-FILE OR R; END-OF-TAPE Issue the following CftS commands:
access 192 c
release a
vmserv
The V"SERV EXEC maps the system PUT and requests permission to print
the "Memo to Users". Reply 'YES'. V"SERV will then print the memos and
remind you to read the memos prior to installing service. VftSERV exits after the mewos printed. After reviewing the "Memo to Users" contained on the system PUT, and
contacting IBK concerning the latest service activity, you can begin the
installation of service to CP by issuing the CftS command:
vmserv nomemo noipl You will be prompted for various information concerning your system
(including staging area addresses and the products for which you wish to
apply service). You should apply service for the SCP (5149-010). The
address of your CP base staging area is 194. Reply "yes" to the
question: IS THIS THE INITIAL SYSGEN OF THIS SYSTE8? (YESINO) CKS is automatically loaded via ipl when the V8SERV EXEC completes.
The 192 TDSK should be accessed as the A disk with the command:
access 192 a Step 14. Prepare the Service Programs Use the GENERATE EXEC procedure to punch the service programs. Issue
the command: generate srvcpgm
These service programs are needed for standalone use; you should
externally identify the decks and keep them intact.
The programs punched are: • DKKFKT (a 3-card loader precedes the D8KF8T text deck) • DMKDIR (a 3-card loader precedes the D8KDIR text deck) • DMKDDR (a 3-card loader precedes the D8KDDR text deck) • IBCDASDI (the IBCDASDI text deck is loadable)
lWhere pp is the PUT number. 242 IB" V"/370 Planning and System Generation Guide

starter Systems The GENERATE EXEC issues the following message:
THE FOLLOWING STANDALONE SERVICE PROGRAMS ARE BEING PUNCHED ** FORMAT - DIRECT - DUMP/RESTORE - IBCDASDI ** PUNCHING I IPL FMT ' ****** PUNCHING • IPL DIR ' ****** PUNCHING • IPL DDR • ****** PUNCHING • IPL IBCDASDI I ******
Each program deck is preceded by a CP userid card and several
separator cards, all of which may be discarded. The format of these
cards is described in the V8L1IQ Operator's Guide. For more information
about the GENERATE EX EC procedure, see "Part 5. Updating V!/310." Step 15. Print or Punch the Starter System Suppiied
Directory, DMKSNT, DMKSYS, and DMKFCB
After the service programs are punched, the GENERATE EXEC asks you
whether you want a copy of the directory printed. Respond "yes." PRINT COpy OF RELEASEn DIRECT? -- RESPOND (YES I NO) : yes
This prints a copy of the directory, as well as copies of ASSEMBLE CP system control file), D!KFCB ASSEMBLE control buffer file), and DKKSNT ASSEMBLE (the system
provided with the starter system. The GENERATE EXEC procedure issues the following message:
A SAMPLE DIRECTORY IS BEING PRINTED TO AID YOU. the DMKSYS (the forms
name table)
IT SHOWS WHERE THE VIRTUAL DISKS ARE LOCATED ON ICPRnLO' YOU KAY USE THESE KINIDISKS FOR OTHER VIRTUAL MACHINES, IN PARTICULAR THE CMS SYSTEM DISK (MAINT 190 ) AND
THE CP STAGING AREA DISK ( MAINT 194 ) INCLUDED IN THIS DIRECTORY IS THE USERID: !AINT WHICH WILL BE USED FOR FUTURE SUPPORT OF THE SYSTEM. THIS USERID SHOULD BE INCLUDED IN THE DIRECTORY YOU BUILD FOR YOUR FLOOR USE. ** CAUTION ** IF YOU DESTROY USER MAINT'S AREAS, IT WILL BE NECESSARY TO RE-BUILD THE ENTIRE SYSTEM. A SAMPLE OF DMKSYS, DMKFCB, AND DMKSNT ASSEMBLE ARE ALSO BEING PRINTED TO AID YOU. THIS SAMPLE DKKSNT IS BASED ON THE INFORMATION INCLUDED IN THE SAMPLE DMKSYS AS WELL AS THE EXAMPLE ALLOCATIONS FOR VMRELn PROVIDED IN THE SYSGEN GUIDE. A COPY OF THIS DMKSNT MODULE HAS BEEN INCLUDED IN THE CP NUCLEUS, SUCH THAT IF ONE USES THE INCLUDED DMKSYS AND THE SAKPLE ALLOCATION PROVIDED IN THE SYSTEM GENERATION GUIDE, HE WILL BE ABLE TO SAVE HIS CKS SYSTEM UPON COMPLETION OF THE SYSTEM GENERATION PROCEDURE. A COpy OF DMKFCB HAS BEEN INCLUDED IN THE NUCLEUS AND NEED NOT BE RE-ASSEMBLED FOR SISTEPI GENERATION. IT HAS BEEN INCLUDED FOR THE USER WHO WOULD LIKE TO MODIFY OR ADD TO THE EXISTING BUFFER L01D. NOTE: IF THE USER WISHES TO MODIFY THE SAMPLE DMKSNT AND/OR DPIKFCB HE !AY INCLUDE THE UPDATED SOURCE WITH THE SOURCE INCLUDED UNDER THE OPTION 'GENERATE VK310', OF THE SYSTEM GENERATION PROCEDURE. IF PRESENT, IT WILL AUTOMATICALLY BE ASSEMBLED AND INCLUDED IN THE NEW CP NUCLEUS. Part 3. Generating VK/310 (CP, CMS, RSCS, and IPCS) 243