Configurations (Terminals) 3278 Display Station aodels 2, 3, and 41 via 3276 Control Unit Display Station Models 2, 3, and 4 (supported as a 3277 attached to a 3271 for remote attachment only) IBM 3767 Communications Terminal, 1 and 2 (operating as a
2741) SPECIAL CONSIDERATIONS AND REQUIRED FEATURES Terminals that are equivalent to those explicitly supported may also
function satisfactorily. You are responsible for establishing
equivalency. IBa assumes no responsibility for the impact that any
changes to the IBM-supplied programs or products may have on such
terminals.
Prior availability of an RPQ does not guarantee or imply current or
future availability. Contact your IB8 branch office for ordering
information concerning the RPQs mentioned with the following features.
The IBK 2741 Communication Terminal is supported on either duplexed
switched or point-to-point nonswitched lines connected to a western
Electric 103A2 (or equivalent data set). The following features are
required features: PTTC/EBCD (19571, Part 11161963) or standard Correspondence (19812, Part 11167043) print elements Transmit Interrupt (17900) or Transmit Interrupt Control RPQ IE40681 Receive Interrupt (14708) For switched lines, the Data Set Attachment (#9114) and feature (13255) are required. e For point-to-point nonswitched lines, one of the following features
is required:
--Data Set Attachment (19115 duplexed for facility D1) or
--Data Set Attachment (19116 duplexed for facility B2) or
--Data Set Attachment (19120 duplexed for facility B1 or D1) or Line Adapter (14635 for 4-wire limited distance line) --IBM Line Adapter (14691-4694 for 4-vire shared nonswitched line) --IBM Line Adapter (14647 for 4-wire nonswitched line)
The following features, although not
convenience and usability of the terminal: Print Inhibit (15501) required, enhance the Red Ribbon Control RPQ 1868019 (supported for PTTC/EBCD keyboard
only) Typamatic Keys (18341) Pin Feed Platen (19509) lModels 3 and 4 operate in 2 default mode. Part 1. Planning for System Generation 113
Configurations (Terminals) lQ2Q £Qnt£Q! ftogel§, gng Feature§: The IBft 1050 Data Communication System is supported on either switched
or point-to-point nonswitched lines with these features: 1051 Control Unit (Model 1 or 2) with these features:
--Transmit Interrupt (17900) or Transmit Interrupt Control RPQ tE26903 --Receive Interrupt (16100) or Receive Interrupt Control RPQ tE27428
--Text Time-Out Suppression (19698) --First Printer Attachment (14408). This feature is required to
attach a 1052 Printer-Keyboard to the 1051. IBM 1052 printer-Keyboard (Model 1 or 2) with the PTTC/EBCD print
element (19571, Part 11167963) For switched lines, the Data Set Attachment (19114) is required. For point-to-point nonswitched lines, one of the following is
required:
--Data Set Attachment (19115 for facility Dl) -- or
--Data Set Attachment (19116 for facility B2)
-- or
--Data Set Attachment (19120 for facility Bl or Dl) or Line Adapter (14691-4694 for 4-wire shared nonswitched line)
or -- --IBM Line Adapter (14647 for 4-vire nonsvitched line)
The following features, although not
convenience and usability of the terminal:
required, enhance Automatic Ribbon Shift and Line Feed Select (11295) Automatic EOB on Carrier Return RPQ tE28235 111Q Uni!§, and Desira1;!le the
The following control units can be locally attached on a byte
multiplexer, block multiplexer, or selector channel to support 3270 devices: 114 IBM VM/370 Planning and System Generation Guide
Previous Page Next Page