TERMIN AL l!acro TERMINAL Macro Use the TERMINAL macro to define (1) a display station or printer that
is attached to the remote 3270 display system or (2) a terminal address
that is available to attach an additional remote 3270. Each terminal
address attached to a cluster must be represented by a TERMINAL macro. Only one TERMINAL macro is specified for a standalone 3275 display
station.
Code one TERMINAL macro for each display device and each printer
attached to a cluster control unit (3271 or 3276) You must code a
TERMINAL macro for every terminal address to which a terminal can be
attached, even if a terminal address is unused. When you code a
TERMINAL macro for an unused terminal address, specify a valid TERl!= operand and the correct selection or addressing characters.
For a 3274 Model lC Control Unit that has 3277s, 3284s, 3286s, 3287s
(attached via Terminal Adapter Types Bl, B2, B3, or B4), or 3288s
attached, first you must code a TERMINAL macro for all 3278s, 3287s, and
3289s in groups of 8 until all 3278s, 3287s, and 3289s have been
included. You must code a TERMINAL macro for every terminal address in
each group of 8. Then, following these macros, you must code a TERMINAL
macro for each 3277, 3284, 3286, 3287, or 3288. Again, you must code a
TERMINAL macro for every terminal address to which a terminal can be
attached.
Code only one TERMINAL macro to define the display station,
optionally a printer, attached to a standalone station (3275).
TERM=3275 to define the 3275 display station and, optionally, MODEL=3 to define a 3284 or 3286 printer attached to the 3275.
and
Code
code All the TERMINAL macros defining the devices attached to a remote 3270 station must follow the CLUSTER macro that defines the control unit
for that station. The groups of CLUSTER and macros must
precede all other macros in the Dl!KRIO file.
The format of the TERMINAL macro is:
r I Name Operation Operands I I TERMINAL I TERM=r
75
!
I I 3277 I I 3284 I I 3286 I I 3288 I I 1 I , SEL ECT=cudv I I I I r , I , " MODEL=ll , I , , MODEL=3, , , L .J I I I I [ , FEATURE=OPRDR] L Part 2. Defining Your Vl!/370 System 137
TERMINAL PIacro 3284 3286
3288
is the device type of
clustered or standalone
are allowed:
Device Display Station IBM 3276 Display Station IBM 3277 Display Station IBM 3278 Display Station IBM 3284 Printer IBM 3286 Printer IBM 3287 Printer IBM 3288 Line Printer IBM 3289 Printer SEL ECT=cudv
the remote 3270 station 3270 control unit. The TERM= 3275
3277
3277
3277 3284 3286
3284 or 3286
3288
3288
attached to the
following devices
are the 4-digit hexadecimal selection or addressing characters assigned to this device
r
where:
cu are the characters for the control unit
dv are the characters for the device Use Figure 17 to determine the selection and addressing characters
for this device. The SELECT operand is ignored if DI1L=YES is
specified for the 3275 in the CLUSTER macro. If a printer is attached to the 3275
r
it has the same address
as the 3275 display station.
r , 11tQJLEL=2 , I MODEL=3, L .J
is the model number of the printer; the default is model 2.
The following printers can be attached to a 3271, 3274, and 3276
cluster control unit: IBM 3284 Printer r Model 2 IBM 3286 Printer, Model 2 IBM 3288 Printer r Model 2
The following printers can be attached to a remote 3274 PIodel 1C
cluster control unit: IBM 3284 Printer Model 2 IBM 3286 Printer Model 2 IBM 3287 printer Models 1 and 2 IBM 3288 Printer Model 2 IBM 3289 Printer Models 1 and 2
The following printers can be attached to a 3276 cluster control
unit: IBM 3287 Printer Models 1 and 2
13A IBM VM/370 Planning and System Generation Guide
Previous Page Next Page