TERMINAL PIacro 3284 3286
3288
is the device type of
clustered or standalone
are allowed:
Device Display Station IBM 3276 Display Station IBM 3277 Display Station IBM 3278 Display Station IBM 3284 Printer IBM 3286 Printer IBM 3287 Printer IBM 3288 Line Printer IBM 3289 Printer SEL ECT=cudv
the remote 3270 station 3270 control unit. The TERM= 3275
3277
3277
3277 3284 3286
3284 or 3286
3288
3288
attached to the
following devices
are the 4-digit hexadecimal selection or addressing characters assigned to this device
r where:
cu are the characters for the control unit
dv are the characters for the device Use Figure 17 to determine the selection and addressing characters
for this device. The SELECT operand is ignored if DI1L=YES is
specified for the 3275 in the CLUSTER macro. If a printer is attached to the 3275
r it has the same address
as the 3275 display station.
r , 11tQJLEL=2 , I MODEL=3, L .J
is the model number of the printer; the default is model 2.
The following printers can be attached to a 3271, 3274, and 3276
cluster control unit: • IBM 3284 Printer r Model 2 • IBM 3286 Printer, Model 2 • IBM 3288 Printer r Model 2
The following printers can be attached to a remote 3274 PIodel 1C
cluster control unit: • IBM 3284 Printer Model 2 • IBM 3286 Printer Model 2 • IBM 3287 printer Models 1 and 2 • IBM 3288 Printer Model 2 • IBM 3289 Printer Models 1 and 2
The following printers can be attached to a 3276 cluster control
unit: • IBM 3287 Printer Models 1 and 2
13A IBM VM/370 Planning and System Generation Guide

TERl!IN1L !acro The following printers can be attached to a standalone 3275
station: • IBM 3284 printer, l!odel 3 • IBM 3286 Printer, l!odel 3 (via RPQ l!B4317) FEATURE=OPRDR specifies the optional feature, operator identification card
reader, that is available on the 3277 Display Station, l!odel 2, or
the magnetic slot reader on a 3278 Display Station, l!odels 2, 3,
and 4. 1: This TERMINAL macro describes a 3277 with a selection address
of 2, and a control unit address of 2. TER!INAL TERl!=3277,SELECT=E2C2,FEATURE=OPRDR 1: This TERftINAL macro describes a 3286 with a selection address
of 3 and a control unit address of 3. TERl!INAL TERl!=3286,SELECT=E3C3 J: This TERl!INAL macro describes a 3284 with a selection address
of 4 and a control unit address of 4. TER!INAL TERl!=3284,SELECT=E4C4,MODEL=2 !: This TERMINAL macro describes a 3275 Display Station with a
3284 Printer, Model 3, attached and a control unit address of O. TER!INAL TERM=3275,SELECT=6040,!ODEL=3 If no printer is attached to the 3275, code: TER!INAL TERM=3275,SELECT=6040 Part 2. Defining Your V!/370 System 139