point-to-point communication line connected to a
by a
x
The line at address
Controller and the corresponding
instruction for the
device "not operational" at
therefore unusable.
THE
generate a list of the resource identification codes that correspond to
each line address. Give the list to the operations group at your
installation. The operator needs to know the resource identification
code when he issues the commands to control the operation of the remote
The resource identification code is a four-digit hexadecimal code.
The low-order three digits of the resource identification code are the
resource address. The high-order digit is the line code.
The resource address is generated by
resource address of
macro after the
address of
maximum of
digits of the resource identification code.
The line code is also generated by
listing for
the resource identification code). Locate the label
56