Starter Systems A message displayed on the console, indicates the 192 minidisk is
defined: DEVICE 192 DEFINED
Before any new minidisk area can be used for CMS files, it must be
initialized with the CKS FORKAT command, which formats the area into
fixed-sized blocks. Issue the command:
format 192 d
The CKS FORKAT command prompts you with the following message: FOR8AT WILL ERASE ALL FILES ON DISK ID(192)1. DO YOU WISH TO CONTINUE? (YES/NO): Respond "yes", prompts you with: ENTER DISK LABEL:
tmp192
Enter a one-to-six character alphameric label for the minidisk. CMS then issues: FOR8ATTING DISK D Inn' {CYLINDERS} FORPIATTED ON ID (192) I Obtain write access to your CPIS system disk:,
link cmssys 190 190 w write Step 13. Apply the CP (Control Program) Service The system PUT that was mounted in Step 10 is a system update service
that can include new functions as well as cumulative system changes for VK/370. The latest system PUT contains all new updates, as .ell as all
previous updates since the last VK/310 base release. PID automatically
ships the system PUT to the user location, and the user is responsible
for applying the updates to VPI/310 systems. The system PUT supplied
with the starter system should be installed as part of the system
qeneration procedure. Use the 192 TDSK created in Step 12 in place of the CPGEN 191 disk
for the remainder of this procedure (up to the point of loading your new
CP system via IPL).
Issue the following CPIS commands:
copy * * a = = d
vmfplc2 load * * d
Part 3. Generating V8/310 (CP, CMS, RSCS, and IPCS) 241

Starter Systems The system issues the following messages:
D11
D1
D1
D1 LOADING ••••• 5749010 06pp3a 5749010 EXEC V"SERV EXEC Vf!lFPLC2 "ODULE END-OF-FILE OR R; END-OF-TAPE Issue the following CftS commands:
access 192 c
release a
vmserv
The V"SERV EXEC maps the system PUT and requests permission to print
the "Memo to Users". Reply 'YES'. V"SERV will then print the memos and
remind you to read the memos prior to installing service. VftSERV exits after the mewos printed. After reviewing the "Memo to Users" contained on the system PUT, and
contacting IBK concerning the latest service activity, you can begin the
installation of service to CP by issuing the CftS command:
vmserv nomemo noipl You will be prompted for various information concerning your system
(including staging area addresses and the products for which you wish to
apply service). You should apply service for the SCP (5149-010). The
address of your CP base staging area is 194. Reply "yes" to the
question: IS THIS THE INITIAL SYSGEN OF THIS SYSTE8? (YESINO) CKS is automatically loaded via ipl when the V8SERV EXEC completes.
The 192 TDSK should be accessed as the A disk with the command:
access 192 a Step 14. Prepare the Service Programs Use the GENERATE EXEC procedure to punch the service programs. Issue
the command: generate srvcpgm
These service programs are needed for standalone use; you should
externally identify the decks and keep them intact.
The programs punched are: • DKKFKT (a 3-card loader precedes the D8KF8T text deck) • DMKDIR (a 3-card loader precedes the D8KDIR text deck) • DMKDDR (a 3-card loader precedes the D8KDDR text deck) • IBCDASDI (the IBCDASDI text deck is loadable)
lWhere pp is the PUT number. 242 IB" V"/370 Planning and System Generation Guide