specifies the actual count of blocks to read.
writesize
Specifies the number of blocks to write. writesize must be a value from 0 to 65535.
A value of 0 (which is the default) means random, whereas any other number spe-
cifies the actual count of blocks to write.
count
Specifies the number of files, blocks or tape marks to process.
blockid
Specifies the ID of the block to be located.
value
Specifies the settings for compression and ECC. A value of ‘0’ means OFF,
whereas a value of ‘1’ means ON. The default is ‘1’ (ON).
margin
Specifies the EOT margin. margin must a value from 0 to 65535, the default is ‘0’.
offset
Specifies the offset from which data blocks are to be dumped.
length
Specifies the length of data blocks to be dumped.
6.1.4 Examples
Example 1:
Display the status of SCSI tape device “Tape0”.
FTAPE –f Tape0 STATUS
6.1.5 Sample Utility Output
Sample 1:
Display the status of SCSI tape device “Tape0”.
D:\Hercules>ftape
Fish's Win32 SCSI Tape Test Utility, v1.6.1.353
Copyright (C) 2004-2007, Software Development Laboratories
http://www.softdevlabs.com (fish@softdevlabs.com)
.
.
several lines not diplayed
.
.
Command? status
Retrieving status...
Warning! Unable to request variable blocksized i/o
due to media parameters retrieval failure!