The CPU state can be changed through selecting “Online” or “Offline” in the drop-down list and clicking
on the “Update” button.
4.4.9 GPRs
The GPRs (General Purpose Register) view displays the current values of the general purpose registers.
There is no possibility to change the values of the general purpose registers from this view. To alter the
contents of the registers use the registers view instead.
Figure 25: Web Browser Interface – GPRs
4.4.10 CRs
The CRs (Control Register) view displays the current values of the control registers. There is no possi-
bility to change the values of the control registers from this view. To alter the contents of the control re-
gisters use the registers view instead.
Figure 26: Web Browser Interface – CRs
4.4.11 PSW
The PSW view displays the current contents of the Program Status Word (PSW). Like in the GPRs and
CRs view the value cannot be changed. To alter the contents of the individual PSW fields the “PSW”
console command must be used.
The “Auto Refresh” button has the same function as in the log view. Through clicking on “Auto Refresh”
the view is refreshed automatically. The refresh interval in seconds can be specified in the entry field
beneath the “Auto Refresh” button. Once auto refresh is turned on you can stop it by clicking again on the
same button, whose description meanwhile has changed to “Stop Refreshing”.
