When the CMD key is held down and the forward space key is pressed once, the
characters at and to the right of the cursor position (flashing character) are moved
to the right one position, and a blank character is inserted at the cursor position.
The cursor does not move. For example:
/-,Flashing character
Before the insert operation:
After the insert operation:
When these keys are both held down, the characters continue to move to the
right and blank characters continue to be inserted.
Note: If there is a character in position 64 of line 0, the insert operation will
not work.
When this key is pressed once, the cursor moves one position to the left. When
it is held down, the cursor continues to move to the left. When the cursor reaches
position 1 on one input line (line 1 or 01, it wraps around to the last position on
the other input line.
am
Delete
When the CMD key is held down and the backspace key is pressed once, the
character at the cursor position (flashing character) is deleted and all characters
to the right are moved over one position to the left to close up the space. The
cursor is not moved. For example:
Before the delete operation: 1234456 \
After the delete operation: 123456
-Flashing character
When tlhese keys are both held down, the characters at the cursor position con-
tinue to be deleted and all the characters to the right are moved to the left.

f I
\
<-
This key (located above the numeric keys) can be used only in execution mode.
When this key is pressed once, each displayed line is moved up to the next line.
As the lines are moved up, the top line is lost as it is moved off the display screen.
When this key is held down, the lines continue to move up.
This key (located above the numeric keys) can be used only in execution mode.
When the key is pressed once, each displayed line is moved to the next lower line.
As the lines are moved down, the bottom line is lost as it is moved off the display
screen. When this key is held down, the lines continue to move down.
1;1
Copy Display \
U
If there is a 5103 Printer, when the CMD key is held down and this kev is pressed
once, all the information presently on the display screen is printed. COPY
DISPLAY is operational even when the system is in the hold state (the HOLD
key has been pressed once).
Note: The L32 64 R32 switch has no effect on what will be printed.
INDICATOR LIGHTS
The 5100 console (Figure 2) has the following indicator lights:
Process Check
When on, this light indicates that a system malfunction has occurred. In this case,
press the RESTART switch to restart the system operation. If the system opera-
tion cannot be successfully restarted after several attempts, call your service repre-
sentative.
c;
9