Operation field yalug page of GC20-1807-7 As Updated April 1, 1981 by TNL GN25-0829 characteristic2LfQImat Bytes 15-22 specify the write
password.
Bytes 23-30 specify the multiple
password.
The access mode, the read password,
the write password, and the
multiple password are replaced in
the directory entry. Therefore,
specify existing values that are
to be retained as well as values
that are to be changed. Before control is returned to the virtual machine, DIAGNOSE Code X'84' sets a condition code and, if errors were detected, a return code
in the Ry reqister. The condition codes and return codes are defined follows:
o
1
The directory was successfully updated. DIAGNOSE Code X'84' directory is unchanged.
error.
detected an error. The
The return code defines the 10,11 An error occurred writing the directory to a direct
access device. To update the directory, use the
directory service program described in the and Guide. 20 thru 25, 27, 90 DIAGNOSE Code X'84' encountered a processing error.
26
28 30 31 40,41 42, 43
To update the directorY6 use the directory service
program described in the ang Generation Guide.
Specified minidisk
directory entry.
address does not exist in
The value in the OPERATION field of the parameter
list is invalid.
The specified USERID could not be found.
The password specified in the fixed-length
the parameter list does not match the
password of the USERID being updated.
area of
current
The value specified for the virtual machine storage
size or for the maximum virtual machine storaqe is too large. The maximum allowable size is 16 meqabytes. The value specified for the virtual machine storage
size or for the maximum virtual machine storage size
contains a syntax error or an invalid character.
Part 2. Control Program (CP) 209
Page of GC20-1807-7 As Updated April 1, 1981 by TNL GN25-0829 51
52, 53 63
65,66 70 71
72 80 81
82, 83 62
The specified privilege classes are invalid.
The specified privilege classes contain a syntax
error or an invalid character. The specified priority contains a syntax error or an
invalid character.
The priority value is too large.
allowable value is 99. The maximum
Parameter list size error; if return code=65, the
list exceeds 112 bytes; if return code=66, the list
size is less than zero bytes long.
A specified option is invalid.
The value X'PPPPFFPP' was not coded after the list
of options.
The option value contains a syntax error or an
invalid character.
The parameter list contains an invalid minidisk
address.
The parameter list specifies an invalid access mode
for a minidisk.
The mini disk read, write, or multiple password
specified in the parameter list requires a change in
the size of the directory entry. 210 IBM VM/370 System Programmer's Guide
Previous Page Next Page