October 1, 1979 FRESS COMMANDS SET MODE OF DISPLAY
Display
SM
• SM Set Mode of Display ___________________________
SMODE specifies the combinations of Display and Editing Modes
desired.
SMode <option>°
D B_
T S_
OPTIONS _______
<option> may be any string of the following symbols
concatenated together (with no intervening blanks):
B...(Brief Mode) Display off, nothing printed.
D _...(Display Mode) The amount of the Display Window specified
by the last SDISPLAY is printed after each command.
S...(Static Edit Mode) Buffer does not move with editing
operations (used primarily on display consoles).
T _...(Transcription Edit Mode) Buffer moves to one word or code
before the beginning of the editing operation performed
(system default, used primarily on typewriter terminals)
NOTES _____
• The <option> string is interpreted letter by letter from left
to right.
• Any invalid letters are ignored, and conflicting Modes (ST or
BD) are resolved by using the right-most Mode in the string.
• To temporarily override the current Display Mode, see Section
2.3.1.
MESSAGES ________
INVALID MODE CHARACTERS WERE IGNORED
226 -- Section 5 Release 9.1 FRESS Resource Manual
Display
SM
• SM Set Mode of Display ___________________________
SMODE specifies the combinations of Display and Editing Modes
desired.
SMode <option>°
D B_
T S_
OPTIONS _______
<option> may be any string of the following symbols
concatenated together (with no intervening blanks):
B...(Brief Mode) Display off, nothing printed.
D _...(Display Mode) The amount of the Display Window specified
by the last SDISPLAY is printed after each command.
S...(Static Edit Mode) Buffer does not move with editing
operations (used primarily on display consoles).
T _...(Transcription Edit Mode) Buffer moves to one word or code
before the beginning of the editing operation performed
(system default, used primarily on typewriter terminals)
NOTES _____
• The <option> string is interpreted letter by letter from left
to right.
• Any invalid letters are ignored, and conflicting Modes (ST or
BD) are resolved by using the right-most Mode in the string.
• To temporarily override the current Display Mode, see Section
2.3.1.
MESSAGES ________
INVALID MODE CHARACTERS WERE IGNORED
226 -- Section 5 Release 9.1 FRESS Resource Manual
